Journal-Publications

Journal Publications

  1. M.A. Unnikrishnan, J. Edwin Raja Dhas, K. Anton Savio Lewise, J.C. Varghese, M. Ganesh, Challenges on friction stir welding of magnesium alloys in automotives, Mater. Today Proc. (2023). https://doi.org/10.1016/j.matpr.2023.03.789.
  2. A.K. Darwins, M. Satheesh, J.E.R. Dhas, K.A.S. Lewise, R.A. Raj, B. Manideep, Parametric optimization of friction stir welded ZE42 rare earth alloys using grasshopper modelling technique, Int. J. Interact. Des. Manuf. (2023). https://doi.org/10.1007/s12008-023-01347-z.
  3. K. Anton Savio Lewise, J. Edwin Raja Dhas, R. Pandiyarajan, Corrosion Behavior of FSSWed AA2024 and AA7075 Dissimilar Aluminum-Alloy, Lect. Notes Mech. Eng. (2023) 225–232. https://doi.org/10.1007/978-981-19-3895-5_17.
  4. Jose Tomy.M,Prawin Angel Michael,KR.Rony.” Review of modelling of temperature distribution in solid brake disc “Australian Journal of Mechanical Engineering , Volume 21, Issue 2, Pages 595 – 609, 2023
  5. Palani swamy and Michael, P.A. (2023), Online grid impedance estimation for grid-connected inverters using APT-BMFO, Sustainable Energy Technologies and Assessments, Volume 56,March 2023, 103095.
  6. D.S.Robinson Smart,J.Pradeep Kumar,Stephen Manova etl.. , “Mechanical and tribological assessment of AA7075 reinforced Si3N4/TaC/Ti hybrid metal matrix composite processed through stir casting process”, Advances in materials and processing technologies (Taylor & Francis),2023,pp.1-23.https://doi.org/10.1080/2374068X.2215603.
  7. Rahul, T.S., Brema, J., Wessley, G.J.J., Evaluation of surface water quality of Ukkadam lake in Coimbatore using UAV and Sentinel-2 multispectral data , International Journal of Environmental Science and Technology, 2023, 20(3), pp. 3205–3220
  8. Prashant Kumar ; Ram Krishnan Sharma; Piyush Gaur , “ Limiting periodic orbits in the neighborhood of the triangular equilibrium points when the more massive primary is an oblate spheroid ”, AIP Conference Proceedings 2797, 090001 ,2023, July 14 2023 .https://doi.org/10.1063/5.0149703.
  1. J.E. Raja Dhas, K.A. Savio Lewise, K.N. Kumar, V. Raja, H.A.Z. AL-bonsrulah, H. Ahmad, S.W. Yao, M. Al-Bahrani, Effect of coconut shell nanopowder reinforcement in the development of palm fiber composites, Front. Mater. 9 (2022) 1–16. https://doi.org/10.3389/fmats.2022.986011.
  2. J. Vivek, P.V.A. Kumar, K.A.S. Lewise, V. Velmurugan, Improvement in the graphite electrode wear characteristic of electrical discharge machined Nimonic 90 through plasma nitriding, laser hardening and duplex process, Sadhana - Acad. Proc. Eng. Sci. 47 (2022) 1–14. https://doi.org/10.1007/s12046-022-01966-4.
  3. Chinju Saju and Michael, P.A. (2022) ,Hybrid electric car comparison to increase the reliability for fuel efficiency, Renewable Energy Focus, pages 3019-316, December 2022. https://doi.org/10.1016/j.ref.2022.10.005
  4. Prawin Angel Michael, et.al .” Weather observation and forecasting using radiosonde” Telkomnika (Telecommunication Computing Electronics and Control),Volume 20, Issue 6, Pages 1376 – 1383,December 2022.
  5. Prawin Angel Michael, et.al .” Penetration Estimation in SEM, EDAX Dental Imaging Systems for Desensitization Application”(2022) Electronics 2022, 11(19), 3234,pp.1-16. https://www.mdpi.com/2079-9292/11/19/3234
  6. Meenal, R., Michael, P.A., et.al .”Machine learning based smart weather prediction”(2022) Indonesian Journal of Electrical Engineering and Computer Science, Vol. 28, No. 1, October 2022, pp. 508-515.
  7. Prawin Angel Michael, N. Palanisamy (2022) ‘Stability issues and mitigating techniques employed in AC grid, materials today proceeding, Volume 69, Part 3, 2022, Pages 1431-1436, October , 2022. https://doi.org/10.1016/j.matpr.2022.09.503
  8. Vagish D. Mishra , S. Venkatachalam, Balkrishna C. Rao, and H. Murth, ”Size Effect Stemming from Specimen Geometry on Mechanical Properties of an Aluminum Alloy”, Journal of Materials Engineering and Performance, 2022, 32, 562–576 DOI: 10.1007/s11665-022-07142-3
  9. R. Gayathri, G. Jims John Wessley, "Dynamic Behaviour of CFRP Composite Panel for Various Impact Load Location", Journal of Pharmaceutical Negative Results, Vol 13 (S3), 2022, https://doi.org/10.47750/pnr.2022.13.S03.118 .
  10. R. Gayathri, G. Jims John Wessley, "Numerical Simulation of Impact Velocity on CFRP Aircraft Skin with Hat Shaped Stringer", Journal of Pharmaceutical Negative Results, Vol 13 (S3), https://doi.org/10.47750/pnr.2022.13.S03.119 .
  11. D.S.Robinson Smart,J.Pradeep Kumar,Kuldeep Kr Saxena, “Influence of TaC/Ti/Si3N4 on mechanical and corrosion performance of AA7075 alloy matrix composite processed by stir processing route”,Indian Journal of Engineering and Material Sciences,2022,V29(3),pp.355-365.
  12. D.S.Robinson Smart,Ummal Salmaan etl.., Experimental investigation and optimization of powder metallurgy processing parameters of Si3N4/HfC/MoS2 reinforced with Al7075”,International Journal of Interactive Design and Manufacturing,2022,pp.169-175. DOI:10.1007/s12008-022-00912-2
  13. Balaji, K., Wessley, G.J.J., Khandal, S.V., Gore, M., Enhancement of Aerodynamic Efficiency of a Formula Car by Incorporating a Passive Device in the Front Wing , Lecture Notes in Mechanical Engineering, 2022, pp. 225–237
  14. Balaji, K., Wessley, G.J.J., Khandal, S.V., Structural and Thermal Analyses of Gas Turbine Blades with Internal Cooling System Under Steady-State Conditions , Lecture Notes in Mechanical Engineering, 2022, pp. 149–161
  15. Rahul, T.S., Brema Karunya, J., John Wessley, G.J., A Novel Remote Sensing Based Approach to Estimate the Water Quality Index Using Sentinel-2 Multispectral Data , 1st IEEE International Conference on Smart Technologies and Systems for Next Generation Computing, ICSTSN 2022, 2022
  16. Jose, P.S., Jose, P.S.H., Wessley, G.J.J., Rajalakshmy, P., Environmental Impact of Electric Vehicles, EAI/Springer Innovations in Communication and Computing, 2022, pp. 31–42.
  1. Gautam, S., Sammuel, C., Bhardwaj, A., Shams Esfandabadi, Z., Santosh, M., Gautam, A.S., Joshi, A., Justin, A., John Wessley, G.J., James, E.J. Vertical profiling of atmospheric air pollutants in rural India: A case study on particulate matter (PM10/PM2.5/PM1), carbon dioxide, and formaldehyde (2021) Measurement: Journal of the International Measurement Confederation, Volume 185,2021,110061, ISSN 0263-2241,https://doi.org/10.1016/j.measurement.2021.110061.
  2. Justin Sundararaj, A., Guna, K.R., William, M. Experimental investigation of the effect of temperature on ignition of modified kerosene (2021) International Journal of Engine Research, DOI: 0.1177/1468087420988191,
  3. Arun Kumar Ramasamy, Madhu Ganesh, Keerthivasan Rajamani, Ashok Kumar Loganathan, Rudramoorthy Rangaswamy, Investigation of concentrated solar collector with discretized flat mirrors in parabolic arrangement, Energy for Sustainable Development,Volume 64,2021,Pages 25-34,ISSN 0973-0826, https://doi.org/10.1016/j.esd.2021.07.005.
  4. Sellamuthu, H., Sharma, R.K. Regularized luni-solar gravity dynamics on resident space objects. Astrodyn 5, 91–108 (2021). https://doi.org/10.1007/s42064-020-0085-6
  5. Rajasekhara Reddy Mutra, J Srinivas, Jakeer Hussain Shaik, Maddela Chinna Obaiah, Gunji Balamurali and Puneet Kumar, Turbocharger rotor vibration reduction methodology with an active control scheme, Noise & Vibration Worldwide 2021, https://doi.org/10.1177/09574565211030714
  6. Balaji.K, G. Jims John Wessley, “Study on the Influence of Mass Flow Rate over a National Advisory Committee for Aeronautics 6321 Airfoil Using Improved Blowing and Suction System for Effective Boundary Layer Control”, SAE International Journal of Aerospace Engineering, Vol 14 (2), 2021, https://doi.org/10.4271/01-14-02-0011.
  7. K. Balaji, G. Jims John Wessley, Enhancement of Aerodynamic Efficiency of Aerofoil using Improved Blowing and Suction System, Advances in Science and Technology Research Journal, Vol 15 (2), 116-125.
  8. Chinnasamy, Varalakshmi, G. Jims John Wessley, Malini, Sanjith, Sheikh, “IoT control and layer formation of FDM on polycarbonate based aluminum” Materials Today: Proceedings, Volume 45, 2021 Pages 2809 – 2811.
  9. Jayapradha A, G. Jims John Wessley, Vimalarani G, Kumar P.R. Subbiah R. Maniraj S, “Mathematical modeling and investigation on aluminium bronze MMC using ECM process”, Materials Today: Proceedings, Volume 45, 2021 Pages 2121 – 2124.
  1. Balaji, K., Jims John Wessley., Experimental investigations on the performance of a modified co-flow jet aerofoil, Indian Journal of Science and Technology, Volume 13 (19), 1873-1881.
  2. Sundararaj, A.J., Pillai, B.C., Guna, K.R., Experimental investigation of effect of temperature on ignition behaviour of seeded refined kerosene, Thermochimica Acta, Volume 683, January 2020.
  3. D Pon Mary Pushpalatha, Joseph Pushparaj, R Gayathri, Correlation analysis between element and aromatic bond count attributes of illicit drugs, Journal of Physics: Conference Series, 1706 012032.
  4. Harishkumar Sellamuthua, Ram Krishan Sharma, Nishanth Pushparaj, Srinath Ravichandrand, SyedPeer Mohamed Shah Khadri, Regularized analytical orbit theory with solar radiation pressure, Proceedings of the International Astronautical Congress, IAC-20-C1.VP.x60338, pp 1-7.
  5. A Arantza Jency, Ram Krishan Sharma, Gagandeep Singh, Stationary solutions, critical mass, Tadpole orbits in the circular restricted three-body problem with the more massive primary as an oblate spheroid, Indian Journal of Science and Technology, Volume: 13, Issue 39, pp 4168-4188.
  6. Prashant Kumar, R K Sharma, Periodic orbits in the neighborhood of the triangular equilibrium points in the photogravitational restricted three body problem – Part 1, Indian Journal of Science and Technology, Volume: 13, Issue 32, pp 3275-3294.
  7. Udhayaraman, R.,Subramanian, H., Mulay, S.S., Venkatachalam, S., Multi-scale approach-based studies on the damage-healing and fracture behavior of plain-woven textile composite, Mechanics of Advanced Materials and Structures, https://doi.org/10.1080/15376494.2020.1809037.
  8. Daniel Antony, A., Gopalsamy, M., Pavithra, K.,Dinesh Babu, R., Aeroelastic gust response of an unmanned aerial vehicle: Technical note, International Journal of Vehicle Structures and SystemsVolume 11, Issue 4, 2020, Pages 430-433.
  9. Parameshwari S., Kumar P., Thanigaiarasu S., Rathakrishnan E., Mixing characteristics and enhancement of sonic elliptic jets from a twin elliptic orifice, International Journal of Vehicle Structures and Systems, vol 12 (2), 10.4273/ijvss.12.2.23.
  10. Uthra, M.P., Daniel Antony, A., Comparative investigation of laminar separation bubble on a wing at low Reynolds number, International Journal of Vehicle Structures and Systems, vol 12(3), doi.org/10.4273/ijvss.12.3.22.
  11. Parameshwari, S., Kumar, P., Thanigaiarasu, S., Rathakrishnan, E, Experimental Investigation of Twin Elliptic Orifice Using High Speed Jet Facility, Lecture Notes in Mechanical Engineering, doi.org/10.1007/978-981-15-3631-1_4.
  12. Parameshwari, S., Kumar, P., Thanigaiarasu, S. & Rathakrishnan, E. 2020, Experimental Investigation of Twin Elliptic Orifice at Different NPR Levels, Lecture Notes in Mechanical Engineering, doi.org/10.1007/978-981-15-1307-7_62
  13. Sunny, K.A., Kumar, P., Rao, G.B., A study on novel ducted blade VAWT using subsonic wind tunnel, Journal of Green Engineering, 10(12), pp 13410–13415.
  1. Kumar, P., Sharma, R.K., Resonant periodic orbits in Sun-Jupiter and Sun-Mercury photogravitational restricted three-body problem, International Journal of Mechanical and Production Engineering Research and Development, 2249-8001, Vol. 9, Issue 3, Jun 2019, 267-278.
  2. Jims John Wessley.G, Pradeep, S, Parametric analysis of a dual combustion ramjet engine, International Journal of Recent Technology and Engineering. Vol 7 (6), pp. 130-135.
  3. Chauhan, S., Jims John Wessley, G., Thermodynamic performance analysis of a micro turbojet engine for UAV and drone propulsion, International Journal of Recent Technology and Engineering, Vol 7 (5), pp. 1-6.
  4. Sundararaj, A.J., Pillai, B.C., K.R, G., Subash, A.N., Haran, A.P., Kumar, P., Investigation of Ignition Delay for Low Molecular Weight Hydrocarbon Fuel by Using Shock Tube in Reflected Shock Mode, Journal of the Geological Society of India, Vol 93, pp 218-222.
  5. Jims John Wessley, G, Design and modeling of a micro turbojet engine for UAV propulsion, International Journal of Engineering and Advanced Technology, 119(12), pp 16765-16771.
  6. Jims John Wessley, G., Srinivas, S., Azgar Ali, M.D, Preparation and characterization of an aluminium 6061 alloy-based metal matrix composite, International Journal of Engineering and Advanced Technology, Volume-8, Issue-3S, 113-116.
  7. Pillai, B.C., Panicker, S., Sundararaj, A.J., Asirvatham, L.G, Thermophysical properties of refined kerosene—alumina nanofluid, Recent Advances in Materials - Mechanics and Management, Recent Advances in Materials, Mechanics and Management, pp. 263-269.
  8. Rajib Kanti Monda, L., Gayathri, R., Mercy Shanthi, R. Performance exploration of mixed airfoil small scale horizontal axis wind turbine blade by QBLADE and CFD, International Journal of Recent Technology and EngineeringVolume 8, Issue 1 Special Issue 4, Pages 339-344.
  9. Jose, P.S., Kathiresh, M., Jims John Wessley G, Jose, P.S.H. E-Waste : Environmental issues and management - A review, Indian Journal of Environmental Protection, Volume 39, Issue 10, pp 954-958.
  10. Gayathri, R., Mercy Shanthi, R., Musica, S.R. Characteristic fatigue life research on the centrifugal impeller, International Journal of Recent Technology and Engineering, Volume 8, Issue 2 Special Issue 11, pp 2934-2938.
  11. Manoj, R., Ranjith Kumar, A., Murugesan, G., Jeyajothiraj, P., Flow simulation over a bulbous heat shield of a typical launch vehicle, International Journal of Recent Technology and Engineering Volume 8, Issue 2 Special Issue 11, pp 2944-2948.
  12. Jims John Wessley, Swati Chauhan, Modeling and Performance Simulation of a Micro Turbojet Engine Using Flownex, Indian Journal of Science and Technology, Vol 12 (22), pp 1-5.
  13. Subha Hency Jose, G. Jims John Wessley and R. Kotteeswaran, Efficacy of classical tuning method for nonlinear multi variable processes - A case study with fluidized bed coal gasifier, ARPN Journal of Engineering and Applied Sciences, Vol. 14 No. 12, 2170-2184.
  14. Mercy Shanthi, V. Sheela, R. Gayathri A. Edwin, Weight optimization of steel trusses using genetic algorithm, International Journal of Civil Engineering and Technology, Volume 9, Issue 11, 853-859.
  15. Harishkumar Sellamuthu, Ram Krishan Sharma, Regularized luni-solar gravity dynamics on resident space objects, Astrodynamics, Vol 5, 91-108.
  16. Harishkumar Sellamuthu, Ram Krishan Sharma, Benjamin John Solomon, Srinath Ravichandran, Syed Peer Mohamed Shah Khadri, Optimized re-entry time prediction of Molniya orbit objects, Proceedings of the International Astronautical Congress, IAC-19-A6.9.10, pp 1-5.
  17. Harishkumar Sellamuthu, Subramanian Arumugam, Ram Krishan Sharma, Sun Gravity-Assist to Trans-Lunar Injection Orbits, Lecture Notes in Mechanical Engineering, pp 1-10, DOI:10.1007/978-981-15-0772-4_1.
  18. Ritesh Arohan, Ram Krishan Sharma, Periodic orbits in the planar restricted photo-gravitational problem when the smaller primary is an oblate spheroid, Indian Journal of Science and Technology, Volume 13, Issue 16, pp 1630-1640.
  19. K Balaji, G Jims John Wessley, Experimental investigations on the performance of a modified co-flow jet aerofoil, Indian Journal of Science and Technology, 13(19), 1873-1881.
  20. Daniel Antony, A, Gopalsamy, M., Pavithra, K., Dinesh Babu, R, Effects of flexural and mass axes position of simple rectangular wing on flutter speed, International Journal of Vehicle Structures and Systems, Vol 11 (5), 476-480.
  21. Sahu, M., Alfred Sunny, K., Kumar,W., Baburao, G., Gnanasaravanan, S, Effect of work postures on the musculoskeletal stresses on computer aided designers and office staff working on computer in India, International Journal of Scientific and Technology Research, Vol 8, Issue 11, 1120-1123.
  22. Abraham, P.J., Kalathil, A.J., Murugesan, G., Jeyajothiraj, P. Theoretical and experimental of evaluation of flow field over a double delta wing at supersonic speeds, International Journal of Recent Technology and Engineering, Volume 8, Issue 2 Special Issue 11, pp 2939-2943.
  1. Sunny, K.A., Kumar, P., Manoj Kumar, N., Banerjee, J., Adheena, G.J., Airfoil selection and computational study on the torque performance of 4-blade vertical axis wind turbine, Journal of Physics: Conference Series, 1139 (2018) 012040, doi:10.1088/1742-6596/1139/1/012040.
  2. Sunny, K.A., Kumar, P., Kumar, N.M., Veena, A., Adheena, G.J., Two Blade Vertical Axis Wind Turbine: Investigations on the Torque Generation at Different Rotational Velocities, IOP Conference Series: Materials Science and Engineering, 455 012093, doi:10.1088/1757-899X/455/1/012093.
  3. Paul, A.J. & Gnanaraj, S.D., "Finite element analysis of composites under different load conditions with the effect of hybridization of glass reinforcement on Kevlar fibres", International Journal of Mechanical Engineering and Technology, vol. 9, no. 11, pp. 446-454.
  4. Kumar, N.M., Babu Rao, G., Sunny, K.A., Mahmudul, H.M., Life-cycle cost comparison of electric boosted and natural gas boosted solar water heating system, International Journal of Mechanical Engineering and Technology, Volume 9, Issue 9, pp. 1263–1269.
  5. Jims John Wessley.G, Chauhan, S, Parametric analysis of a down-scaled turbo jet engine suitable for drone and UAV propulsion, AIP Conference Proceedings, Volume 1952, Issue 1, pp.020024-1 to 020024-8.
  6. Sundararaj, A.J., Pillai, B.C., Asirvatham, L.G., Convective heat transfer analysis of refined kerosene with alumina particles for rocketry application, International Journal of Mechanical Engineering and Technology. Volume 32, Issue 4, pp. 1685-1691.
  7. Adheena, G.J., Sunny, K.A., Justin, A., Kumar, N.M., Effect of Reynolds number and weber number on the estimation of droplet size for an injector, International Journal of Mechanical Engineering and Technology, Volume 9, Issue 3, pp. 382–391.
  8. Adheena, G.J., Sunny, K.A., Vasanth, A., Kumar, N.M., Influence of combustion chamber pressure on injector performance, International Journal of Mechanical Engineering and Technology. Vol.9(2), pp 810-820.
  9. Musica, S.R.L., Godswill, E., Design of HMD symbology integration using OLED, Journal of Advanced Research in Dynamical and Control Systems, Vol. 10, 05-Special Issue, pp 933-940.
  10. Musica, S.R.L., Punithavathi, D., Tharisani, K.B., Design of HMD symbology using fiber optics, Journal of Advanced Research in Dynamical and Control Systems, Vol. 10, 05-Special Issue, pp 926-928.
  11. Gayathri, R., Kumar, P., Latha, P.P., Glory, J., Design of air storage tank and run time calculation for supersonic blow down wind tunnel, International Journal of Recent Technology and Engineering, Volume-7 Issue-4S2, pp 73-77.
  12. Jims John Wessley, G., A comparative study on the performance enhancement of photovoltaic panels using different water-cooling methods, Journal of Advanced Research in Dynamical and Control Systems, Vol 10, PP 511- 516.
  13. Sellamuthu, H., Sharma, R.K., Hybrid orbit propagator for small spacecraft using kustaanheimo-stiefel elements, Journal of Spacecraft and Rockets, Vol 55 (5), pp 1282-1288.
  14. Moses, J.E., Jennitta, I., Jims John Wessley. G., Studies on controllable aircraft rescue system for passenger aircrafts using multi parachutes and parafoils, International Journal of Vehicle Structures and Systems, Volume 10, Issue 1, pp. 1-10.
  15. Joseph, D.R., Devi, P.B., Gopalsamy, M., Investigation on effect of square dimples on NACA0012 airfoil with various Reynolds numbers, International Journal of Ambient Energy, vol 42 (4), pp 397-402.
  16. Sunny, K.A., Kumar, P., Kumar, N.M., Priscilla, S., Computational analysis of three blade vertical axis wind turbine, Progress in Industrial Ecology, Vol. 12, Nos. 1/2, pp.120–137.
  17. Sunny, K.A., Kumar, N.M., Justin, A., Harithra, M., Development of single and multi-jet conical nozzle based open jet facility for cold jet simulation, Advances in Intelligent Systems and Computing, https://doi.org/10.1007/978-981-10-5520-1_29.
  18. Teja, M.P., Antony, A.D., Design of rotary unmanned aerial vehicle, Journal of Advanced Research in Dynamical and Control Systems, Vol. 10, Special Issue 03, pp 831-838.
  19. G Jims John Wessley, A Gaith Franklin, S J. Vijay, Fabrication and mechanical characterization of stir cast AA6063-Borosilicate-Fly Ash hybrid metal matrix composites, International Journal of Engineering and Technology (UAE), Vol 7, pp 101-105.
  20. Behera, S., Antony, A.D., Vibrational analysis of composite propeller blades, Journal of Advanced Research in Dynamical & Control Systems, Vol. 10, 03 Special Issue, pp 824-830.
  21. Krishnaraj, G. Jims John Wessley, Performance Analysis of a Micro Turbofan Engine using Matlab and GSP Intended for the Propulsion of Male UAVs, International Journal of Pure and Applied Mathematics, Volume 118 No. 20, pp 157-163.
  22. Prashant Kumar, R.K.Sharma, Effect of Radiation Pressure on Resonant Periodic Orbits in Photo Gravitational Restricted Three-Body Problem, International Journal of Mechanical and Production Engineering Research and Development, Vol. 10, Issue 2, 1167–1178 .
  23. Aldin Justin Sundararaj, B.C.Pillai, Lazarus Godson Asirvatham, N.Subash, Kirthana Stephan, Experimental investigation of thermo-physical properties of Al2O3 nanofluid on commercial available blue dyed Kerosene for low volume concentration, Nano Hybrids and Composites. Vol. 17, pp. 156-165.
  1. Antony, D., Viswanadh, C.B.V., Krishnaraj, R., Gopalsamy, M., Structural dynamic analysis of turbine blade, IOP Conference Series: Materials Science and Engineering. Vol 247, pp 012007.
  2. Subha Hency Jims, S. Dharmalingam and G. Jims John Wessley, An Improved Method to Control the Critical Parameters of a Multivariable Control System, IOP Conference Series: Materials Science and Engineering. Vol 24, pp 012006.
  3. Jims John Wessley, G., Preliminary Investigation on the Effects of Shockwaves on Water Samples Using a Portable Semi-Automatic Shock tube, OP Conference Series: Materials Science and Engineering. Vol 247, pp 012002.
  4. Naveen Kumar, K., Gopalsamy, M., Antony, D., Krishnaraj, R., Viswanadh, C.B.V., Design and Optimization of Aerospike nozzle using CFD, IOP Conference Series: Materials Science and Engineering. Vol 247, pp 012008.
  5. Brusly Solomon, A., Arul Daniel, V., Ramachandran, K., Pillai, B.C., Renjith Singh, R., Sharifpur, M., Meyer, J.P, Performance enhancement of a two-phase closed thermosiphon with a thin porous copper coating, International Communications in Heat and Mass Transfer, Vol No. 82, pp 9–19.
  6. Antony, D., Viswanadh, C.B.V., Krishnaraj, R. & Gopalsamy, M., Structural dynamic analysis of turbine blade", Proceedings of the International Conference on Recent Advances in Aerospace Engineering, ICRAAE 2017. Doi.org/10.1109/ICRAAE.2017.8297245
  7. Isravel, H., Sharma, R.K, Effect of oblateness on transition curves in elliptic restricted three-body problem, IEEE Explore - 2017 First International Conference on Recent Advances in Aerospace Engineering (ICRAAE), 2017, pp. 1-6, doi: 10.1109/ICRAAE.2017.8297237.
  8. Velan, Y., Musica, Cost Effective Design and Development of Manned Drone, IEEE Explore - 2017 First International Conference on Recent Advances in Aerospace Engineering (ICRAAE), 2017, pp. 1-5, doi: 10.1109/ICRAAE.2017.8297236.
  9. Sundararaj, A.J., Jose, D., Sunny, A., John, S.T., Kumar, N., Gopalsamy, Effect of blast pressure on discrete models using a shock tube, IEEE Explore - 2017 First International Conference on Recent Advances in Aerospace Engineering (ICRAAE), pp. 1-5, doi: 10.1109/ICRAAE.2017.8297238.
  10. Lyle, J.L., Guna, K.R., Kumar, P., Sundararaj, A.J., Rupture dynamics of shock-tube diaphragm, IEEE – Explore 2017 First International Conference on Recent Advances in Aerospace Engineering (ICRAAE), pp. 1-4, doi: 10.1109/ICRAAE.2017.8297207.
  11. Moses, J.E., Jennitta, I., Jims John Wessley. G, Controllable aircraft rescue system: Rescue system using multi parachute for passenger aircrafts with case study, IEEE-Explore 2017 First International Conference on Recent Advances in Aerospace Engineering (ICRAAE), pp. 1-6, doi: 10.1109/ICRAAE.2017.8297210.
  12. Daniel Raj, J., Sharma, R.K., Deflection approach using solar electric propulsion to Apophis 99942, IEEE Explore 2017 First International Conference on Recent Advances in Aerospace Engineering (ICRAAE), 1-6, doi: 10.1109/ICRAAE.2017.8297248.
  13. Kumar, K.N., Gopalsamy, M., Antony, D., Krishnaraj, R., Viswanadh, C.B.V., Lyle, J.L., Design and optimization of aerospike nozzle using CFD, IEEE Explore 2017 First International Conference on Recent Advances in Aerospace Engineering (ICRAAE), pp. 1-6, doi: 10.1109/ICRAAE.2017.8297246.
  14. Sellamuthu, H., Sharma, R.K., Orbit theory with lunar perturbation in terms of kustaanheimo–Stiefel regular elements, Journal of Guidance Control and Dynamics, 40 (5), pp 1269-1274.
  15. Jims John Wessley.G, Narciss Starbell, R., Sandhya, S., Modelling of optimal tilt angle for solar collectors across eight Indian cities, International Journal of renewable Energy Research, Vol. 7, No. 1, pp 353-358.
  16. Jims John Wessley, Swati Chauhan, Investigation on Scaling of Gas Turbine Engines for Drone Propulsion, Journal of Engineering Technology, Management and Applied Sciences. Volume 5, Issue 6, pp 2349-4476.
  1. Latha S, Gayathri. R “Generation of structured grids for computational aerodynamic simulations around NACA airfoil 0012” International Journal of Research in Aeronautical and Mechanical engineering ISSN (online): 2321-3051 vol.4 issue 3, March 2016 pgs: 20-47.
  2. Renjith Singh R, Selladurai, V, Ponkarthik, PK, & Solomon, AB, “Effect of anodization on the heat transfer performance of flat Thermosyphon”, Experimental Thermal and Fluid Science, vol. 68, pp. 574–581. (Impact Factor : 2.18) (Annexure-I, ISSN:0894-1777)
  3. Renjith Singh R, Selladurai, V, Solomon, AB, & Emerald Ninolin, S, “Performance of flat two-phase closed thermosyphon with porous surface”, International Journal of Applied Engineering Research, vol. 10 no. 85. (Annexure-II, ISSN:0973-4562).
  4. R.K.Sharma published a paper titled “Evolution of Periodic Orbits in the Sun-Saturn System” in the International Journal of Astronomy and Astrophysics Vol No.6, Pages 175-197, 2016. Google based impact factor: 0.85
  5. Jims John Wessley G, C.P. Jawahar & P. Koshy Mathews published a paper titled “Preliminary investigations on an air-cooled based low temperature flash evaporation desalination system for small-scale applications” International Journal of Desalination and Water Treatment 34, 15735-15739, DOI: 10.1080/19443994.2015.1077740, 24 July 2016. IF: 1.272
  6. Mahender Reddy Anumula (Alumnus 2012 batch), A. Daniel Antony published a paper titled “Numerical Vibration of Airfoil Vibration” in the International Journal of Mechanical and Production Engineering Vol: 4,Page:53-58/2016/ July Google Scholar, Dictionary of Science, OAJI, Microsoft Research, Research Gate/3.05 ISSN (Online): 2321-2071 ISSN (Print): 2320-2092.
  7. Mr.K.Alfred Sunny published a paper titled “Vertical Axis Wind Turbine: Aerodynamics Modelling and its Testing in Wind Tunnel” in the International Conference Elsevier – Computer Science Procedia Vo.93, PP 1017-1023, 2016. IF: 1.08
  8. Dr.R.K.Sharma, Prithivi Raj C (Alumnus 2012 batch) published a paper titled “Halo Orbits around Sun-Earth L1 in Photogravitational Restricted Three-Body Problem with Oblateness of Smaller Primary” in the International Journal of International Journal of Astronomy and Astrophysics Vol No. 6, P.P 293-311, September 2016.
  1. Renjith Singh, R., Selladurai, V., Ponkarthik, P.K. & Solomon, A.B., Effect of anodization on the heat transfer performance of flat thermosyphon, Experimental Thermal and Fluid Science, vol. 68, pp. 574-581.
  2. John Wessley, J. & Mathews, K., Thermodynamic analysis of a single and two-stage solar assisted air-cooled flash evaporation desalination system for small-scale applications, Desalination and Water Treatment, vol. 54, no. 9, pp. 2364-2375.
  1. Roshan Thomas Eapen (UR10AE041) , Ram Krishan Sharma., ‘A study of halo orbits at the Sun–Mars L1 Lagrangian point in the photo gravitational restricted three-body problem’ in the Journal of Astrophysics and Space Science, May 2014;13:14 (IF 1.686).
  2. Aldin Justin, Robin James, Shruti Panicker, A.N.Subash, Saravana Kumar "Development of high altitude test facility for cold jet simulation " International Journal of Research in Aeronautical and Mechanical Engineering Vol.2 Issue.9,September 2014. Pgs: 34-42, Impact factor: 0.875
  3. Sandhya. S, Narciss Starbell R, Jims John Wessley.G., 'Modelling and analysis of Latitude-based solar radiation estimation models suitable for Indian cities' Journal of basic and applied engineering research, October 2014 ; 1 (9), pp. 120-123.
  1. G. Jims John Wessley., Investigations on low temperature Flash evaporation Desalination for small-scale applications, International Journal of Engineering and Technology, October 2013, 5(5), 4109-4115.
  1. Dr. Ram Krishan Sharma., On the evolution of the ‘f’ family in the restricted three-body problem, International Journal of Astrophysics and Space Science, March 2012 (IF: 1.686).
  2. Dr. Ram Krishan Sharma, Oblateness effect of Saturn on periodic orbits in the Saturn-Titan restricted three-body problem, International Journal of Astrophysics and Space Science, March 2012 (IF: 1.686)
  3. Dr. Ram Krishan Sharma., On the dichotomy in the Earth-Moon system Restricted Three-Body Problem” International Journal of Astrophysics and Space Science, 28 April 2012 (IF: 1.686)